Hilary's Cabbage Patch Clothes Closet
Learning about 1980's Cabbage Patch Kid clothing.
This St. Patricks Day I celebrated by purchasing a unicorn! Join me as I unbox my treasure at the end of the rainbow.
I bought myself a unicorn and it arrived in time for St. Paddy’s Day! Join me as I unbox the treasure at the end of the rainbow.
Meet Mateo Lucas (blue) and Patrick Dante (green).
Patrick is wearing my unicorn outfit!
How appropriate for St. Patrick’s Day.
Of course, what else was I going to name him? After all, he’s all about the green!
You’ve got 4 pairs of CPK jeans that you just washed. They’re all slightly different. Which ones goes with this outfit?? Maybe this will help.
Outfit #10 – Windbreaker Outfit
Identifying Outfit #10 Windbreakers by factory
Identifying Windbreaker Outfit (#10) shirts
These pants are the bane of my A-type personality. It’s VERY difficult to differentiate one pair of jeans from the other. Jeans are never tagged. Some of the factory differences are VERY subtle. It’s also hard to find correct information as you have to get it from a MIB kid to know the jeans are correct. Jeans can be switched out so easily and it’s done frequently.
As a consequence, this section is rather sparse. Here’s what I know.
I’ve never actually seen these. I just have pictures.
Alert: When cleaning CPK jeans, soak them separately from all other fabrics as the dye runs extensively.
Why know how to identify the factory of an outfit #10 shirt, after all, they’re tagged! But, what if you can’t see the tag in the picture? What if it’s been cut off?
Outfit #10 – Windbreaker Outfit
Identifying Outfit #10 Windbreakers by factory
Identifying jeans by factory
There isn’t much information here as I have observed very few factory differences in the shirts.
The striped shirts from the Windbreaker Outfit (#10) appear to come in two fabrics.
Version 1: A thin cotton t-shirt material. Known factories: OK
Version 2: A thicker synthetic material. Known factories: P, PMI, LF, IJ, WW
In general, Version 2 tends to be larger (physically) than Version 1.
I don’t know much about the shirts that come with the foreign outfits except for Jesmar outfits.
Jesmar shirts are sometimes solidly coloured but are generally striped. However, the colours are not always ways and [insert colour here]. I also have one shirt recorded that’s white with small polka dots. They are often a very thin fabric, are badly sewn with very thin hems, and have unfinished bottom hems. Some also have typical Jesmar Velcro.
The shirt for the 25th Anniversary Windbreaker outfit likely doesn’t have a tag in it. It will be purple and white. However, I can’t confirm this as I’ve never actually seen it myself. This is the only girl’s 25th Anniversary outfit I don’t own.
The shirt for outfit #100 is blue and white striped and the most obvious difference from outfit #10 shirt is the red CPK logo on the chest.
What jacket goes with which shirt in the CPK Windbreaker outfit #10? Which factory made which jacket? Find out!
Outfit #10 – Windbreaker Outfit
Identifying striped windbreaker shirts by factory
Identifying windbreaker outfit jeans by factory
The majority of CPK windbreaker jackets from outfit #10 aren’t tagged. If the jacket gets separated from the original outfit, it can be difficult to tell which shirt/jeans go with it. The shirts are tagged. So, if you can figure out the jacket’s factory, you can match it to the right shirt.
You can use the following characteristics to help determine which factory made a jacket.
Keep in mind that this list is not comprehensive. It is only based on what I can confirm as of publication. I always appreciate getting new or conflicting information.
There are two types of hems: exposed elastic and enclosed elastic.
Exposed elastic is visible and is attached using two lines of sewing. Known factories: OK, IJ
Enclosed elastic isn’t visible. It is enclosed in jacket fabric. It is a large strip of elastic, which is only sewn into the jacket at either end. Known factories: P, PMI, KT, LF
All Coleco zippers are plastic with a metal pull, and most have KKK on the zipper pull. I have found VKK on some P factory zippers, but not all. If you have another zipper on your jacket, it is likely from a foreign factory (See below) or is aftermarket
The logo seems to vary the most. There are two basic versions. One sits at almost 90 degrees from the zipper and bottom hem. The other is at more of an angle/curve.
The logos also come in varying sizes and shades of green. In some cases, they just look a bit different. Here are the logos that I have identified so far.
Jesmar: The logo is different. It has a shadow outline and is smaller than the OK one. It is applied quite far from the zipper. These jackets tend to be very thin fabric. The zipper pull is a different shape.
Lily Ledy: These jackets seem to come with a zipper or button closure or no closure system at all. For jackets with a zipper, the pull is very distinctive in shape.
Triang Pedigree: These jackets have a wide white zipper but the pull itself is silver metal.
Tsukuda: According to my records, Tsukuda jackets close with velcro. I would like to confirm this.
Special thanks to Andrea’s Cabbie-kids for some of the previous pictures and information.
> In the only two examples of KT windbreaker outfits that I have, the tag is in the jacket, not the shirt. So, if you get a shirt without a tag, it must be KT.
> One 25th Anniversary outfit was the windbreaker outfit. It’s purple. Here is a comparison of the PA windbreaker versus a Coleco OK jacket.
> Outfit #100 is a windbreaker outfit. The most obvious and unmistakable difference in the jacket is the lack of a logo. The outfit tag is in the jacket, not the shirt.
Sometimes the fabric an outfit is made out of can give you an idea about where it was made.
Do you have an outfit made from an unusual fabric? What does it mean?
From experience, I’ve noted that from 1983 to 1984, certain factories used specific fabrics for some outfits. This means that if an outfit is made from a certain fabric, you’ll have some idea of what factory/place may have made it.
I’m sorting this list in two ways; first by fabric type, second by outfit. The first group had more than one or two outfits made with it. Please note, I’m not an expert in fabrics, so if I’ve used the wrong term/label please let me know!
This fabric was used by the Chinese factories for the Corduroy Suit (#5), Ruffled Overalls (#12), and P factory preemie Elephant Rompers (P#13).
This fabric was used by all Taiwanese factories for the Corduroy Suit (#5), Ruffled Overalls (#12), and preemie Sailor Romper (#14).
This fabric was used by Taiwanese IC and WW factories for the Corduroy Suit (#5), and Elephant Romper (#7). NOTE: WW factory outfit from the 1983 series are HTF.
It was also used by the SS and WS factories for the preemie Sailboat Romper (#14).
I believe that this fabric was only used by the OK factory for the Elephant Romper (#7), however, I have a very limited sample size. It was also used for Jesmar Preemie bunny outfits.
NOTE: Velveteen was used for other outfits too, but they are later outfits and it wasn’t factory or outfit indicative.
This fabric was used by some Jesmar factories for Swing dresses and Yoke dresses.
Striped Jogging Suit (#18) – Most of them have cotton material at the arms and legs. However, some are made with a silkier, thicker, more synthetic material. This fabric was used by the P, PMI, LF, and IJ factories (that I know of).
Kitty Jogging Suit (#5) – Heather-grey coloured fabric was only used by the PMI and USA factories.
31 Tracksuit (#8) – Taiwanese material is not very fuzzy and is very thin.
USA Pinafore Dress – The pinafore section of these dresses is a very thin cotton, almost translucent.
Fake jean cotton fabric – This was only used for Jesmar Denim Rompers.
Jesmar Tights – Rather than the regular silky cotton material, some Jesmar tights are made of a more knitted type fabric. They were generally short and did not fit well.
You can also determine factory based on:
– the thread pattern uesd on white t-shirts, see PTP: Wonderful White Shirts
– the type of silk label used, see PTP: Silk Label Secrets (Updated 08/21)
Twins continued to be produced in 1986 but with some differences. Also, information on other types of twins, prototype outfits, and more!
Coleco continued to produce Twin sets in 1986 wearing the original four outfits, but they also started to use twin sets as a dumping ground to get rid of overstock. At this time, it wasn’t unusual to find a variety of combinations in twin boxes, for example:
Especially in the Canadian market, it wasn’t unusual for the dolls wearing these non-twin outfits to be Jesmar as it was at this time that Coleco was looking to rid themselves of the remaining stock from the recently closed foreign factories. (See Jesmars and J Clothing for details.)
The dolls used for twins in 1986 weren’t always P/OK factory and weren’t always the same factory. For example, there are records of sets being OK and PMI. (Ref #4, March 1988, p. 4) This was rare, but apparently, it did happen.
They also dumped twin outfits by putting them on individually boxed regular kids and Cornsilk kids in 1986 and 1987.
Finally, in a last-ditch effort to get rid of stock, twin outfits were sold packaged separately. Often these packages didn’t come with accessories like gloves or shoes.
> The Tsukuda factory is the only foreign factory that manufactured Twins (Ref #3, p. 247). Their twins wear regular 1983 outfits with the word “TWIN” silkscreened on them. These sets are very highly valued by collectors.
> Preemie twins were never produced, but prototypes are visible in catalogue pictures from 1986. (Ref #3, p. 178, 192)
Many prototype outfits can be seen in catalogues from 1986. The outfits aren’t exact, but they’re pretty close! It’s too bad the white dresses were never produced, they’re very pretty.
Butterick produced only one of the twin outfits as a sewing pattern. They are numbered #390 and #3564.
Ref #3, p. 104 – 110
Ref #2, p. 71 – 72
Have you ever seen a donkey patch on a cabbage patch outfit before? I know I hadn’t until now!
This young man is wearing a mystery. He’s a Jesmar, wearing a Jesmar outfit. However, the donkey patch adorning his romper is a bit odd. Has anyone else seen one like it? Anywhere?
Picture courtesy of David Compeau.
There are a few unusual patches that can be found on Coleco outfits (bunny, sheep) but they’ve been seen on more than a few. ( PTP: Plentiful Patches Pt. 1 ) This is the first time I’ve ever seen or heard of a donkey!
Now, it’s not difficult to add a patch, and many of the Jesmar rompers came without one, so this could be just an after-purchase addition. Or, maybe a Spanish seamstress decided to have some fun and add something different.
What do you think? Do you have a theory?
Special thanks to Erin Cavil for sending me this photo. It appears that this is a ‘vintage’ patch, so the time frame is correct, but it was also publicly available for use. Who do you think added it?
Why are Cabbage Patch Kids made by the Jesmar factory so sought after by collectors? What makes them special?
For a variety of reasons (that I will not be detailing), these dolls are generally highly coveted by collectors.
Jesmars and J Clothing
Apparently, this is a frustrating statement, especially for new collectors who want to absorb all the information they can. Oops. In my defence, I was trying to keep the Jesmar post short. Yeah, I know, it didn’t work.
Anyway, after hearing about one reader’s frustration, I decided to add the information in a separate post. So, here it is –
1 – Initially, Jesmar dolls were not legally allowed to be sold in North America. This makes them rarer than regular Coleco dolls. They were also produced for a short amount of time; therefore, fewer of them were produced at all. Refer to my Jesmar post for details on their sales history.
2 – Jesmar used hair colours that were not used by Coleco. Most of these odd hair colours can be found on Early Jesmar kids, dolls likely produced in the first few months when they were still experimenting. Examples include:
3 – Jesmar used hair colour/ eye colour combinations not produced by Coleco. They also produced a wider variety of combinations than Coleco.
4 – A) Jesmar freckled all the head moulds for their entier production period.
Coleco only did one head mould each for two years, 1983 and 1985. (Ref #3, p. 198)
4 – B) Freckles on Jesmar dolls come in a variety of patterns and were hand-painted. Coleco used only one pattern, and they were machine applied. (Ref #3, p. 199-201)
5 – Jesmar used the single ponytail hairstyle with more hair colours than did Coleco. For example, lemon.
6 – Jesmar clothing came in a wider variety of colours/patterns and fabrics than did the Coleco clothes. They were also known to put ‘boy’ clothes on ‘girl’ dolls. Incidentally, the construction of Jesmar clothing often tends to be described as shoddier than the Coleco clothes. For details about Jesmar clothing and how to recognize them, visit Jesmars and J Clothing.
7 – Although some Coleco factories did produce the odd ‘smaller’ kid (i.e. KT factory), Jesmar dolls are known for coming in three distinct sizes. Some were almost 2” taller than Coleco kids while others were much shorter. (Ref #3, p. 198)
8 – Jesmar used the Fuzzy hairstyle on a wider variety of hair colours than did Coleco. For example, they did lemon, auburn, and dark red fuzzy-haired boys. (Ref #3, p. 220)
Special thanks to my mentors on foreign kids who helped with the content and pictures for this post: Callie Anne, Jennifer Pelfrey, Kat Perhouse, and Tammy De.
More information and pictures about Jesmar dolls can be found in the post Jesmars and J Clothing and in Fundamentals of Cabbage Patch Kids, pages 198 to 230.
How to determine which knit sweaters may go with which bubble romper. It’s all in the details!
Like all of the clothing made for Cabbage Patch Kids, the sweaters used in the #9 Bubble Romper Outfit are susceptible to differences based on factory. Meaning, the look of the sweaters changes based on the factory that produced them.
These sweaters are not tagged. (For information on what part of a CPK outfit do come tagged, visit Where are tags in clothing located?) Consequently, it is difficult to confidently match sweaters to rompers.
To determine which factory made a sweater, take note of the following.
NOTE: The factory of manufacture for each sweater is noted in the caption of the picture.
If you have a sweater that is not pictured here, or you have a better picture than one used here, I would love to see it.
I believe that yellow sweaters were only manufactured by the OK factory and for the 25th Anniversary Kids (Play Along).
The correct knit booties will match the sweater. They will have the same tension and knit pattern. For more information visit Shoes: Knit Booties.
These shoes came on Hong Kong Jesmars and Early Tag Jesmars. If they’re spanish, why do they say Hong Kong?
The majority of this information is courtesy of Jennifer Pelfrey via various Facebook messenger conversations. In some cases, I have just quoted her! Thank you, Jennifer! Additionally, kudos to Marta Aleman Perez, Callie Anne, Charlotte Ridgers, and Severine Guiguet for their contributions as well.
For more general information on Jesmar dolls and closing visit Jesmars and J Clothing.
These dolls were likely those produced within the first few weeks or months of production. See below for theories about the origins of the HK aspects. Remember, Jesmar dolls were likely manufactured for less than two years.
These shoes look and feel quite a bit like Hong Kong shoes. They are characterized by:
These shoes are not found exclusively on HK Jesmars. They have also been found on kids with early tags and Made in Spain neck stamps. “Personally, I’ve found them most often on Early Tag/Made in Spain kids with odd hair colors, but they were sometimes used on Early Tag kids with standard hair colors as well.” (Jennifer Pelfrey, FB May 17, 2021)
“There has been some debate over whether these shoes are actually Jesmar made, or whether they were made in Hong Kong and supplied to Jesmar when they were starting out. There are obvious similarities between these shoes and those that we know were manufactured in Hong Kong. So, depending on who you ask, some will say that these are Hong Kong shoes while others will say Jesmar. Until formal documentation surfaces we may never know.” (Jennifer Pelfrey, FB, May 14, 2021)
NOTE: Shoes that say ” Made in Hong Kong” on the bottom are also theorized to be Jesmar shoes, but others think they’re aftermarket. For more information on these shoes, visit These aren’t CPK shoes?!
One collector called the Hong Kong Jesmars a hypothesis. She described them as series of tests so that the Jesmar Co. could figure out what they were going to produce. (FB Conversation, May 17, 2021) Here are some theories as to why their heads are stamped Hong Kong and why the shoes have Hong Kong like qualities.
1) There were unused shoes that had been manufactured in Hong Kong laying around, so Coleco gave them to Jesmar to use until Jesmar could manufacture shoes of their own.
2) “Supposedly, HK moulds were loaned to Jesmar so that they could make sample heads. The samples then went through a review process with Coleco and OAA.” (Jennifer Pelfrey, FB, May 15, 2021) It is supposed that once Jesmar was approved for mass production, shoe moulds and Made in Spain embossed head moulds were provided to Jesmar for ongoing production.
For more general information on Jesmar dolls and closing visit Jesmars and J Clothing and Ref #3, p. 198 – 231.
