Other relevant posts: CPK Shoe Summary, Lacing CPK Shoes

CPK Sneakers were manufactured by Coleco throughout the entirety of their production. However, the characteristics of the shoes varied by factory and over time.

Hong Kong Shoes

For a definition of ‘Hong Kong Kids’, jump to the Glossary.

In the beginning, when production took place in Hong Kong [HK], the shoes had a very distinctive look. In general, they can have a number of these features but do not need to have them all.

• The stitching is VERY prominent.
• They have a thicker feel to the vinyl. In some cases, the vinyl did not mould well and may have a runny look on the inside.
• Some are extremely hard vinyl. VERY hard.
• Not all HK shoes have black text in the heel, but if it is black, it’s likely an HK shoe.
• They tend to look less finished than other shoes. The edges look more like they’ve been cut out, or the vinyl around the edges has been trimmed.
• HK shoes are more likely to discolour and get pox than later shoes.
• The bottoms are ‘bumpy/textured’.
• The body is bumpy (see below).

OK HK Shoes
– very hard & very malleable
– very prominent stitching
– The tongue is not cut out (or is partially cut). It is formed as part of the shoe.
– textured body and bottom
– laces are thick and not very long

P HK Shoes  
– The text runs vertically, not horizontally, in the heel.
– I have not found any P with black text.
– The vinyl is very malleable.

KT  HK Shoes
– I am unable to comment on specifics. I don’t have any in my collection.
Photo courtesy of Christy Gann.

Post HK Shoes – 1986ish shoes

After the ‘experimental’ Hong Kong period, the shoes became more uniform but still had many characteristics that varied by factory. It can be very difficult to ‘match’ shoes. You THINK they should match, but when you put them side by side, they are nothing alike! They aren’t the same shape, colour, texture, etc.

Most of the shoes have the factory indicator and the words HONG KONG stamped on the inside by the heel, on the bottom. The factory indicator can be inside a circle or not.

After production moved to China, the shoes became more uniform in appearance but continued to vary by the factory. Indeed, as more factories began production, the amount of variation increased.

1987-1989

Although there are quite a few colours available, many did not show up until 1988 and 1989 (Transitional period). They came on later kids and wearing outfits 800 – 815 and as separately packaged accessories.

It seems that Hasbro did not continue to produce or use sneakers.

25th Anniversary Sneakers (separate post)

Stripe Patterns

The sneakers come in three different stripe patterns.

#1 – the most vertical
#2 – slightly more angled
#3 – the most angled

Some factories, like P, appear to have produced all three patterns. Others did not. For example, all the OK sneakers I have use pattern #1.

Stripe Colours

The first sneakers came in only two colours, blue and pink.

In 1985 they started producing additional colours.  For example, the stripes on the All-Stars Kids sneakers often matched the colour of the uniform, so colours like red, green, black, and navy blue show up. I believe that most of these shoes were produced by the FD and IC factories. At the same time, both coloured and white striped shoes were produced for Sports Collection outfits (CY and FD) and by the UT factory. Do you have UT shoes with coloured stripes? I have only seen white.

Some colours were produced in varying shades. I believe this was caused by factory variation and changes over time. For example, the PMI factory seems to have very distinct pink and blue colours.

In some cases, the same factory produced different shades of colour. For example, these two P shoes are varying shades of pink.

The Rainbow

Here are all the colours, and their variations, that I have owned. I know that I am missing yellow and hot pink.

Update: Brown stripes came with the Padre’s baseball outfit. Special thanks to Margaret Granato and Jennifer Pelfrey.

Numbers

Some of the shoes have numbers near the factory code. I think these numbers are related to moulds, but I really don’t know. What I do know, is that there are lots of numbers and a matching pair does not have to have matching numbers. One shoe can be 1 and the other 4. Numbers are most often found in shoes produced by the Taiwanese and P factories.

Which outfits came with Sneakers?

• some 1983 regular series outfits; footwear is noted in each outfit post
• outfit #100
• some 500s outfits
• Sports Collection
• All Stars Series
• some 760s Cornsilk outfits
• some transitional outfits from 804 – 815

Sneaker Descriptions by Factory

Disclaimer: The following observations have been made based on my collection. I welcome any information and will not hesitate to make revisions as needed.

OK Shoes
– They are thin and flexible with a tongue that is the same size as the opening.
– The text is raised, comes in two font sizes, and is sometimes blurred.
– They tend to discolour and become sticky more than others.
– They only appear to use stripe pattern 1.

P Shoes
– They tend to stay very white, and the stitching is very prominent.
– The tongue is smaller than the opening.
– The text is raised and very clear. It is generally vertical along the length of the shoe.
Numbers used: 1, 2, 3, 4
Stripe Patterns used: 1, 2, 3

KT Shoes
– They feel like OK shoes but with a very thin top edge. Some are extremely malleable.
– The tongue looks to have been formed as part of the shoe and then cut out.
– Some material is missing, making the tongue smaller than the hole.
– The text is raised.
– The bottom and inside are VERY smooth.
– Some of them have the ‘Jesmar’ shape inside.
Stripe pattern: 1

PMI Shoes (small sample size)
– The feel and stitching are similar to OK shoes, but they tend to say while like P shoes.
– The text is a large, well-spaced PMI that is generally very legible.

IC Shoes
– They are rather hard, with little flexibility.
– Moderately prominent stitching
– The tongue is similar to P shoes.
– The text is raised and very clear. They say MADE IN TAIWAN and have numbers underneath.
Stripe patterns: 2, 3
Numbers: 2, 3, 5

UT Shoes (small sample size)
– They feel and look like IC shoes.
– Text is clear, in a small font.
Numbers: 1, 2, 3, 4, 6
Stripes: 2

FD & CY Shoes
– They feel and look like IC shoes.
– Text can be VERY large or rather small.
FD Numbers: 1, 4,3, 6,9, 12
CY Numbers: 3, 4
Stripe Pattern: 2,3

SS factory: They did not produce sneakers.